Residential district design
Design of residential buildings as part of a housing estate with flats of high comfort.
The site for the construction of houses has an irregular configuration with a pronounced relief difference. The western part of the site borders on apartment and block single-family dwelling houses (number of storeys of buildings: 2-5 storeys), in the eastern part of the site there is a forest area, the southern part of the site borders on a road of district significance. The project envisages apartment blocks with separate volumes, consisting of two separate 6-storey buildings connected with a common ground stylobate structure. In the upper part of the stylobate it is planned to arrange children's playgrounds, recreation areas, small architectural forms and other structures, in the lower part - an open-type car park. The ratio of the total parking places to the flats of the whole quarter is approximately 1.5 parking places per flat.
The array of blocks of flats is dominated by one and two bedroom flats, comprising approximately 80%. The remaining 20% are 3-room flats. In projected 2-3 room flats, according to the needs of residents, the kitchen can be formed as a separate room or combined with the main living space. It is planned to use a ventilated facade system for the exterior of apartment blocks. Entrances are from aluminium sheets, internal balconies are covered with composite panels with wood finish. The floor covering of balconies and terraces is made of boards, products from wood-polymer composite. An efficient ventilation system with heat recuperation is envisaged for each apartment, and an opportunity to install an air-conditioning system (apartment or central) is also provided for. It is necessary to develop options for electric heating and water heating use.
We appreciate Eneca’s readiness to support us with BIM modeling on short notice, as well as their flexibility in providing the necessary resources to meet a strict deadline. All modeling was completed within two weeks, with a division into lots. Eneca’s specialists were always willing to take the time to discuss our concerns and accommodate additional requests.
Eneca’s strong expertise in Revit and professional experience in structural design enabled their team to quickly grasp Implenia’s high modeling requirements. The BIM model was developed in accordance with the 3D BKP Model guidelines and Implenia’s standards, ensuring compliance with parameter and element naming rules as per Baukostenplan Hochbau. Eneca’s detail-oriented and structured approach contributed to the creation of a high-quality BKP model aimed at automating the calculation of construction volumes and costs.
I am pleased with the quality of services provided by ENECA and can confidently recommend them to others in need of similar BIM modeling services.
Het ontwerpproces vereist altijd flexibiliteit en het vermogen om anders te denken, en we waren blij dat Eneca bereid was om ons te ondersteunen en alle projectproblemen samen op te lossen. Toen er in een zeer laat stadium snel enkele wijzigingen moesten worden aangebracht, voerden de specialisten van Eneca deze op een hoogwaardige en tijdige manier uit. De technische competentie en diepgaande Tekla-kennis van het team van Eneca, evenals hun hoge efficiëntie en voortdurende streven naar verbetering, hebben ons belangrijke ondersteuning geboden in ons engineeringproces.
30.07.2021
