
Biomass-fired CHP Plant
In the main building of the mini-CHP, it is planned to install four steam boilers with a capacity of 25 tons of steam per hour each with pre-furnaces for burning bark and wood waste and steam turbine TWIN AA44 - Mono AFA6 - Combi with an electric power of 8 MW. Superheated steam from the boilers is fed to a steam turbine unit equipped with three pressure steam selections. From the steam turbine plant selection, superheated steam is supplied to the technological needs of the enterprise, the heat supply system of the enterprise and the nearby village, the own needs of the mini-thermal power station, and the water heating system in hydrothermal treatment pools.
The project also envisages the construction of a new mechanized chip storage (20,000 m3 of chips), an automated distribution warehouse for supplying fuel to mini-CHP plants and a system of chip and dust pipelines with the total length of about 3 km.
Services
• Architectural Design
• Structural Design
• Main Equipment selection
• Piping design
• Electrical Design
• Automation & Control (Eplan)
• HVAC Systems design
• Construction Supervision
BIM Implementation
Considering the project complexity, all the main structures and systems were modeled in Revit with up to LOD 400. Architectural, Structural, MEP and Process Engineering models were put together in one integral model for BIM Coordination. It has ensured smooth workflow, more optimal design solutions and client involvement in the design process at all design stages.

Based on their experience, I can recommend Eneca.

We worked with Eneca to create a structural Revit model of a residential complex having the floor area of 41 571 qm and consisting of 6 three-storey residential buildings with an underground car park out of 2D drawings.
We appreciate the readiness of Eneca to support us in BIM-modelling at a short notice, as well as their flexibility in providing us with the resources needed to meet a strict deadline. All the modelling was done with the division into lots in a short time within 2 weeks. Eneca’s specialists were always willing to take the time to discuss our concerns and work out additional requests.
The good knowledge of Revit and professional experience in structural design allowed Eneca’s team to quickly grasp high Implenia's modelling requirements. The BIM model was created according to 3D BKP Model guidelines and standards of Implenia including compliance to the parameters and element naming rules according to Baukostenplan Hochbau. The Eneca’s detail-oriented and organized approach helped to create a high-quality BKP model aimed at automating the calculation of construction volumes and costs.
I am pleased with the quality of the services ENECA provides. Thus, I can recommend them to others in need of similar BIM modelling services.

10 project areas together and discussed for some other future opportunities. Their engineering team is located abroad, however, the remote work is well-organized.
The design process always requires flexibility and capability to think differently, and we were pleased to see Eneca’s readiness to support us and solve all the project issues together. When there was a need to do some quick revisions at a very late stage, Eneca's specialists performed them in a high qualitative and timely manner. The technical competence and deep Tekla knowledge of Eneca’s team as well as their high-performance efficiency and always keen in continuous improvement, provided us an important support in our engineering process.
30.07.2021