Find
img
ENECA 360
1. Technologies

The use of licensed software reduces the likelihood of technological failures of information systems and helps to avoid unnecessary legal checks. We use products made by Autodesk (Revit, Civil 3D, NavisWorks, etc.), Trimble (Tekla Structures), EPLAN and other developers, depending on the project needs and the Customer’s requirements.

2. Cost Engineering

We understand that the vision of design does not always match the given budget. We can develop any concept to achieve similar design results within the given budget.

3. Approaches

Reconstruction, modernisation, and the introduction of new cutting-edge process systems may seem confusing and leave you uncertain about where to start and what to do. Be confident, we won’t offer ineffective solutions. Instead, we can offer a set of measures and work that will be justified and efficient for further development of the project. To be precise: we will analyse the status of the project and develop a roadmap for project implementation including the description of the work types and costs

4. Conformance

We strive to monitor the quality of documentation in terms of building codes, fire safety and environment. We have specialists and expert partnerships with companies in these fields. If you require licenses and certificates that we currently lack, we will make every effort to obtain them.

5. Archive

Our extensive project archive allows us to apply proven solutions to pre-design studies across different technologies, while considering cost-effectiveness and profitability.

Mission

Development, headway and formation a friendly team is our mission, which consists of the following goals:

  • Enhancing our creative potential, we create projects for our clients at a high architectural and design level;
  • Actively expanding the geography of our services, we are looking for the best designers and opening offices in new cities. Today ENECA works in Western European countries, Scandinavia, the Baltic states — more than 10 EU countries;
  • Respect is of highly importance! Specialists in the engineering industry must be in demand and their work must be adequately paid. That’s why we put people first in everything we do. A happy, acclaimed person contributes to a high-performing team.
Development of BIM
at ENECA
4d modelling

Binding of works to BIM model objects. Optimisation of the construction plan.

6D Energy Modelling

Reducing operating costs by analysing and optimising resource consumption - Insight, Green Building Studio

8D SAFETY

Tracking information on site safety plans, analysing possible risks of accidents and emergencies.

3D Modelling

Three-dimensional detailed model of buildings and structures. Level of detail up to LOD 400.

5D Cost Estimate

Linking resource and material costs to model objects in the estimating software.

7D Exploitation

Ability to plan and manage processes during construction and operation of buildings and structures.

Our capabilities

All ENECA plugins are now in one place! Installation Manager is a special application where you can install, update and uninstall ENECA plugins. In it you can also find a comprehensive description of the working principle (of the plugin) and watch a tutorial video.

All solutions have a free trial period of 90 days. After the trial licence expires, you have the option to extend it for a fee, or to refuse further use of the plugin.

3D MODELLING

3D information modelling serves as a foundation for all subsequent stages of BIM design. It provides detailed visualisation of architectural, structural and engineering solutions, allowing specialists to more easily identify possible conflicts between sections before construction begins. This facilitates communication between participants in the design process and improves the overall quality of the design.

4D MODELLING

The addition of the time component turns the model into a 4D model, which allows you to plan and track the progress of construction work over time, optimise the timing of each stage and visualise the construction process at various stages. This helps to reduce the risks of downtime and delays, improving overall project control.

5D COST ESTIMATE

5D modelling involves extracting the cost of each of the elements of the model using special software, allowing for automated calculation of materials and their costs, which is important for preparing and adjusting estimates. This approach simplifies budget control and allows you to quickly see how changes in the project affect the total cost of construction.

6D ENERGY MODELLING

The use of 6D-modelling allows the performance of a facility to be analysed over its entire life cycle and its energy efficiency and environmental performance to be taken into account. The assessment of building systems and the information provided at this stage is important for optimising operating costs and monitoring future resource use.

7D EXPLOITATION

7D modelling is concerned with the management of a building once it is commissioned: asset management, maintenance planning, repair work and equipment replacement. The value of this lies in the ability to effectively control documentation and operational processes, which provides convenience and transparency in the management of the facility.

8D SAFETY

8D modelling emphasises safety and risk management on projects. This includes the development of safety plans, emergency compliance planning. 8D improves emergency preparedness and enhances the safety of workers and building visitors. Implementing 8D in BIM promotes proactive risk mitigation measures and enhances the security of the facility.

More about BIM design
Expert
Review

Our quality is confirmed by the conclusions of expertisees in accordance with the standards of the countries where ENECA projects have been completed.

Number of concluded expert examinations:

  • State construction expertise
    534
  • State environmental expertise
    292
  • Industrial safety expertise
    5
  • Non-state construction expertise
    3
  • Sanitary and hygienic expertise
    32
  • Certification of projects according to GMP and Uptime Institute standards
    3
  • Academy of Sciences Seismic Expertise
    3
Associations
and Public
Initiatives
BuildingSMART Association
ENECA is a member of the BuildingSMART Association, a global leader in promoting open standards and innovative solutions for the construction and engineering industries. As part of this esteemed network, ENECA is committed to driving digital transformation, advancing BIM practices, and fostering collaboration across the industry.
World Organisation for Health and Safety in Environments (WOSHIE)

Membership in WOSHIE enables ENECA specialists to analyse buildings for various purposes (offices, shopping centres, hotels, etc.), make recommendations to improve the health and safety of the premises and, after implementation of the recommendations, carry out certification in accordance with WOSHIE standards.

  • Company
    employees
    Only for representative case.
  • Career

    The main thing for us is to grow both qualitatively and quantitatively, be a leader in BIM, further expand and enter new international markets, become a company working on the same level with world design leaders. This is not easy path, but we are following it. And for this, a strong and friendly team is of highly importance.

    they trust us
    Client
    HUAWEI Technologies
    Category
    Data processing center

    At the stage of the competition for the selection of the designer, the company ENECA confirmed the presence of the necessary specialists, experience, qualifications, and financial solvency for the implementation of such an object. The company "HUAWEI Technologies Ltd." would like to note the professionalism and high qualifications of the employees, thanks to whom all the work was carried out in accordance with the terms of the contract.

    Client
    McDonald’s, Burger King, Texas Chicken, KFC
    Category
    Restaurant

    ENECA, commissioned by Burger BK LLC, has completed design documentation for the modernization of a specialized building for the opening of the Burger King facility. ENECA, commissioned by ALS-FastFood LLC, under the project management of the engineering organization ProlaynTSK LLC, has completed design and estimate documentation for the modernization of the cafe premises for the opening of the Texas Chicken fast food chain facility.

    Client
    FAVEA
    Category
    Pharmaceutical industry
    FAVEA Group of Companies expresses its gratitude to the team of ENECA and recommends ENECA to be engaged as a general designer for construction and reconstruction of production facilities of the pharmaceutical industry and medical institutions.